when i can't afford guns, i buy accessories. these are for a garand.
grenade launcher, "projector". accepts hand grenade. had a pair of inert dummies for it but gave them away. if i still had them, i'd call them Donald and Mike. (inert dummies, donald and mike, get it? i'm such a card).
grenade launcher rifle attachment, "spigot". locks onto bayonet lug. projector slides over the end. this one's missing a spring.
30-06 blank cartridge, used to launch grenade. i believe they used a special blank, not just any old blank would do.
on left, cleaning kit oil dipper. on rt., pull-thru and bore brush.
old-style chromed brass cleaning kit. 2 compartments. issued with m1903s and early ww2 garands. fit in the hole in the stock.
left: late- and post-war cleaning kit, plastic. right: two grease tubs. yellow grease is ww2 vintage. brown grease is post-war. yes, that grease has been in there for 70+ years.
rifle multi-tool. bolt wrench, gas cylinder wrench, chamber brush. fit in the other hole in the stock.
Re: garand accessories
3I want a Garand buddy that you slip in to hold the bolt open and to catch your cleaning patch. I've got my buttstock filled with the proper stuff, but don't have the grenade launcher attachment. You gotta get a bayo, though, a must-have accessory--like a Rolex on a pimp.
CDFingers
CDFingers
Crazy cat peekin' through a lace bandana
like a one-eyed Cheshire, like a diamond-eyed Jack
like a one-eyed Cheshire, like a diamond-eyed Jack
Re: garand accessories
4Oh good, these are actually OEM accessories. I pretty much was ready for a knee-jerk "Shit of Goat" response.
LGC Texas - Vice President
Re: garand accessories
5if i ever get a 2nd garand it will be for a special project, involving modifying the receiver to accept my BAR mag. would require shaving the inside of the receiver legs, modifying the clip release to hold/drop the magazine. it's been done, but not sure it's a good idea. want to try it, even though it's sacrilege to mutilate a garand. someone stop me, please.
i have a bayonet, just didn't bother to get it out. also have the ammo belt and a couple of bandoliers. and some more ww2 vintage non-garand items. i'm a packrat/collector.
shit of goat is reserved for the AR15 not for the garand.
i have a bayonet, just didn't bother to get it out. also have the ammo belt and a couple of bandoliers. and some more ww2 vintage non-garand items. i'm a packrat/collector.
shit of goat is reserved for the AR15 not for the garand.
Last edited by lurker on Tue Nov 07, 2017 5:08 pm, edited 1 time in total.
i'm retired. what's your excuse?
Re: garand accessories
6I bought a Garand that had the grease pot in the butt and a piece of cloth stuffed down on it, I imagine to keep it from banging around. The cloth was floral, I think with cherries. Not sure if those were standard issue or arsenal rebuild addition.
Puffing up is no substitute for smarts but it's a common home remedy
Re: garand accessories
7yes, very likely to keep it from rattling.Simmer down wrote:I bought a Garand that had the grease pot in the butt and a piece of cloth stuffed down on it, I imagine to keep it from banging around. The cloth was floral, I think with cherries. Not sure if those were standard issue or arsenal rebuild addition.
pretty sure the floral print was not issue. however, as i'm fond of saying, what is camo, but a floral print?
i'm retired. what's your excuse?
Re: garand accessories
8not necessarily garand, nor even ww2.
US M1 helmet, late ww2. liner not original, 50s i think. came with a note:
"former property of (helmet shell only)
Hudson D. Gill ###E. Holmes Rd. Memphis, TN
HQ co. 714 armored tank Batt 12th Armored Division -Hellcats-"
12th landed in france after d-day, liberated Landsberg concentration camp, was involved in "Battle of Castle Itter"
captured wehrner von braun, adolph eichmann
shell: liner:
US M1 helmet, late ww2. liner not original, 50s i think. came with a note:
"former property of (helmet shell only)
Hudson D. Gill ###E. Holmes Rd. Memphis, TN
HQ co. 714 armored tank Batt 12th Armored Division -Hellcats-"
12th landed in france after d-day, liberated Landsberg concentration camp, was involved in "Battle of Castle Itter"
captured wehrner von braun, adolph eichmann
shell: liner:
i'm retired. what's your excuse?
Re: garand accessories
9next up, a ww1 US m1917. used into start of ww2.
don't know much about this. rough copy of the british ww1 helmet. many americans wore british helmets early in the war, british did not wear american helmets. lots of subtle differences, but the tell-tale is the rivets on the sides. this is american, british used split rivets. notable feature is name "Heldenstrom" written in pencil on chinstrap. this one's in pretty good shape.
don't know much about this. rough copy of the british ww1 helmet. many americans wore british helmets early in the war, british did not wear american helmets. lots of subtle differences, but the tell-tale is the rivets on the sides. this is american, british used split rivets. notable feature is name "Heldenstrom" written in pencil on chinstrap. this one's in pretty good shape.
i'm retired. what's your excuse?
Re: garand accessories
10this one makes me sad.
this was my grandfather's ww1 m1917 helmet. he was a sgt. in the US signal corps, learned to fly while in england, (don't know that he ever flew again until we scattered his ashes from a balloon) on his way to france. he told a story of helping catch a german spy signalling to enemy troops across a valley with truck headlamps. don't know if true. i have some of his papers.
this is in terrible shape as you can see. my brother kept it for 20 years in a drafty humid garage next to a pile of scrap metal.
this was my grandfather's ww1 m1917 helmet. he was a sgt. in the US signal corps, learned to fly while in england, (don't know that he ever flew again until we scattered his ashes from a balloon) on his way to france. he told a story of helping catch a german spy signalling to enemy troops across a valley with truck headlamps. don't know if true. i have some of his papers.
this is in terrible shape as you can see. my brother kept it for 20 years in a drafty humid garage next to a pile of scrap metal.
i'm retired. what's your excuse?
Re: garand accessories
11US ww2 vintage pistol belt markings, illegible.
1911 mag pouch, 1945.
holster, post-korea.ww2 holsters were brown leather
canteen cover, 1945
canteen, 1968. aluminum ww2 examples are getting a little rare, so much so that you can buy reproductions. i remember having one as a kid, and a gas mask and bag, too. back when actual www2 surplus was ubiquitous and cheap. who knows what became of it? ww2 vintage ammo belt, illegible. post ww2 bandolier, loaded clip in cardboard insert, en-bloc clips, cardboard insert.
1911 mag pouch, 1945.
holster, post-korea.ww2 holsters were brown leather
canteen cover, 1945
canteen, 1968. aluminum ww2 examples are getting a little rare, so much so that you can buy reproductions. i remember having one as a kid, and a gas mask and bag, too. back when actual www2 surplus was ubiquitous and cheap. who knows what became of it? ww2 vintage ammo belt, illegible. post ww2 bandolier, loaded clip in cardboard insert, en-bloc clips, cardboard insert.
Last edited by lurker on Tue Oct 24, 2017 5:48 pm, edited 1 time in total.
i'm retired. what's your excuse?
Re: garand accessories
12and finally, the 10" m1 bayonet. some bayonets were cut down from the ww1 vintage m1905 16" bayonet. this is originally made for the garand by Utica Cutlery which made bayonets from ww1 through the korean conflict.
the scabbard is post-ww2 danish, marked with a crown and "HTK', to go with garands given to re-arm denmark after the war.
the scabbard is post-ww2 danish, marked with a crown and "HTK', to go with garands given to re-arm denmark after the war.
i'm retired. what's your excuse?
Re: garand accessories
13Lurker have you seen these https://www.classicfirearms.com/bm-59-s ... 08-caliberlurker wrote:if i ever get a 2nd garand it will be for a special project, involving modifying the receiver to accept my BAR mag. would require shaving the inside of the receiver legs, modifying the clip release to hold/drop the magazine. it's been done, but not sure it's a good idea. want to try it, even though it's sacrilege to mutilate a garand. someone stop me, please.
i have a bayonet, just didn't bother to get it out. also have the ammo belt and a couple of bandoliers. and some more ww2 vintage non-garand items. i'm a packrat/collector.
not for the garand. shit of goat is reserved for the AR15
It's a Garand .. originally converted by the Italians by Beretta to magazine fed and to 7.62 x51
20 minute video with history and how they were built these are built on new receivers and no existing Garand's were harmed making them.... https://www.classicfirearms.com/video/i ... bm59-rifle
Re: garand accessories
14yes i'm aware of the bm59. would prefer to stay with 30-06, just because.
i'm retired. what's your excuse?
Re: garand accessories
15Damn. They won't ship the BM 59 to California. You'd think they'd have a 10 round option and be happy to ship them here.
Re: garand accessories
16Somewhere along the line I acquired a sled, which is a Garand clip that holds only one round instead of eight. It's used to load one round at a time for slow fire relays at CMP Service Rifle matches. Since I have the accessory I must now get my Garand from CMP. It's the Law.
Re: garand accessories
17yes, it is. doesn't matter where you get it, though. cmp is good. gun shop is good. it's all good.HuckleberryFun wrote:Since I have the accessory I must now get my Garand from CMP. It's the Law.
i'm retired. what's your excuse?
Re: garand accessories
18Lot's of goodies for budding WW2 re-enactors...
Bleeding Heart Liberal with Second Amendment Benefits.
Re: garand accessories
19true. i'd do it myself if i were younger and didn't mind shaving. i do know a couple of 20-somethings who do ww2, gave them my dummy grenades, grenade pouch, bandage pouch, e-tool and a 1918-dated khaki 1911 mag pouch when i left TN. i'm just not dead/ready to part with this stuff yet.drigeba wrote:Lot's of goodies for budding WW2 re-enactors...
i'm retired. what's your excuse?
Re: garand accessories
20lurker, you need a 1911 to go with that groovy black holster.
A 1911--the ultimate Garand accessory.
CDFingers
A 1911--the ultimate Garand accessory.
CDFingers
Crazy cat peekin' through a lace bandana
like a one-eyed Cheshire, like a diamond-eyed Jack
like a one-eyed Cheshire, like a diamond-eyed Jack
Re: garand accessories
21I think it does matter where you get your Garand. Some folks that have Garand's like to fiddle around with them and swap parts trying to hump up an "all correct" Garand and a lot of those folks lose interest or find an easier Garand to fake and sell the rifle on to whoever.. here is the problem, swapping bolts and other pieces, for safety reasons, require head spacing and with Garand's sometimes also timing adjustments, .. those checks are often not done.. and many folks, some of which I know, don't give a damn if a part is worn or serviceable so long s it has the correct markings .. they will replace otherwise perfectly good parts with worn or ( formerly) rusty pitted parts that they tried to make look good if the part numbers make the rifle "correct" It isn't about how well a rifle shoots or the actual condition of the parts.. some of these people never shoot the rifle.. they just buy it as cheap as they can and start swapping parts until they can claim it is "all correct" and sell it for as high a price as possiblelurker wrote:yes, it is. doesn't matter where you get it, though. cmp is good. gun shop is good. it's all good.HuckleberryFun wrote:Since I have the accessory I must now get my Garand from CMP. It's the Law.
Read this classic article by Ernie Pyle https://www.gunandgame.com/threads/mism ... nds.39091/
CMP Garand's are inspected for serviceability and safety and gauged and checked to be within tolerances and repaired with good parts if needed.
US WW2 Rifles have got to be the most humped and faked guns in the world, and with little or no care about safety or function.. no profit in that.. what brings in the bucks is the rifle be "all correct" which is about the most unnatural condition for a rifle that has been in the war as possible.
Re: garand accessories
22have a springfield armory milspec, tarted up with aftermarket grips, etc. still have the old parts. close enough for meCDFingers wrote:lurker, you need a 1911 to go with that groovy black holster.
A 1911--the ultimate Garand accessory.
CDFingers
Sarge wrote:I think it does matterlurker wrote:yes, it is. doesn't matter where you get it, though. cmp is good. gun shop is good. it's all good.HuckleberryFun wrote:Since I have the accessory I must now get my Garand from CMP. It's the Law.
i'm retired. what's your excuse?
Re: garand accessories
23Pulled the trigger on one so to speak, that exact model in stainless; pick it up Sunday evening. No groovy gripz yet.lurker wrote:have a springfield armory milspec,
CDFingers
Crazy cat peekin' through a lace bandana
like a one-eyed Cheshire, like a diamond-eyed Jack
like a one-eyed Cheshire, like a diamond-eyed Jack
Re: garand accessories
24they seem to be good pistols.CDFingers wrote:Pulled the trigger on one so to speak, that exact model in stainless; pick it up Sunday evening. No groovy gripz yet.lurker wrote:have a springfield armory milspec,
CDFingers
mine is parkerized. it was my first handgun. grips are hogue, heavy grippy rubber.
there's a pic here somewhere, i'll see if i can find it.
here, 6 or 8 posts down
http://www.theliberalgunclub.com/phpBB3 ... 37&t=26153
i'm retired. what's your excuse?
Re: garand accessories
25Hmmm. Well it's just the version with the grenade launcher they won't ship. They have something similar to a tanker that ships to CA. Heavily pondering...shinzen wrote:Damn. They won't ship the BM 59 to California. You'd think they'd have a 10 round option and be happy to ship them here.
http://www.atlanticfirearms.com/compone ... l?Itemid=0