Ruger 9mm Carbine - sight options

Review and discussions of optic related equipment.

Moderators: admin, Inquisitor, ForumModerator, WebsiteContent

Post Reply
Message
Author
User avatar
senorgrand
Verified Member
Verified Member
Posts: 18599
Joined: Mon Jul 18, 2011 3:05 am
Location: LGC MEMBER: Calif Central Coast
Contact:

Ruger 9mm Carbine - sight options

#1 Post by senorgrand » Tue Jun 11, 2019 10:06 pm

LOVE my 9mm Ruger pistol chamber carbine. I have a stack of Freedom Week Happy Sticks for it that are all loaded-up and ready for the range.

Image

Just wondering if I want to put an optic on it. The sights are great and dead-on (it has a fiber-optic front). It's just that my eyesight sucks and I'm wondering if I want either a red dot or an x1-6 illuminated scope.

I'll be mostly shooting pie-sized plates at no more than 50 yards. Although if I scope it, I'll try to ring some steel out to 100 yards. If a red dot, I'm leaning Vortex Venom at the 6 MOA size, because I could move to a handgun if I want.

If a scope, I'm leaning Vortex Strike Eagle because the reticle looks like it's could be used as a 1.5 MOA or 8 MOA, depending on how you use it. Here's a picture:

Image

Whatchya think?
Image

Release the tapes!

User avatar
kronkmusic
Verified Member
Verified Member
Posts: 328
Joined: Wed Nov 14, 2018 1:34 pm
Location: South Florida
Contact:

Re: Ruger 9mm Carbine - sight options

#2 Post by kronkmusic » Tue Jun 11, 2019 10:28 pm


senorgrand wrote:LOVE my 9mm Ruger pistol chamber carbine. I have a stack of Freedom Week Happy Sticks for it that are all loaded-up and ready for the range.

Image

Just wondering if I want to put an optic on it. The sights are great and dead-on (it has a fiber-optic front). It's just that my eyesight sucks and I'm wondering if I want either a red dot or an x1-6 illuminated scope.

I'll be mostly shooting pie-sized plates at no more than 50 yards. Although if I scope it, I'll try to ring some steel out to 100 yards. If a red dot, I'm leaning Vortex Venom at the 6 MOA size, because I could move to a handgun if I want.

If a scope, I'm leaning Vortex Strike Eagle because the reticle looks like it's could be used as a 1.5 MOA or 8 MOA, depending on how you use it. Here's a picture:

Image

Whatchya think?
I slapped a Burris AR-332 3x illuminated prism on mine and I've been very happy with it, the reticle is fairly similar to the picture you shared. My only real issues with it is the limited eye relief, and it's not the lightest optic ever built, but neither is really a problem for what is primarily a fun range toy. It allows me to hit ridiculously small groups at 50yds fairly easily, and ringing steel at 100yds is cake. I personally feel like 6 MOA is too big a dot for a rifle that you wanna stretch out into the lower end of mid-range shooting.

User avatar
senorgrand
Verified Member
Verified Member
Posts: 18599
Joined: Mon Jul 18, 2011 3:05 am
Location: LGC MEMBER: Calif Central Coast
Contact:

Re: Ruger 9mm Carbine - sight options

#3 Post by senorgrand » Tue Jun 11, 2019 10:37 pm

What's the eye relief?
Image

Release the tapes!

User avatar
kronkmusic
Verified Member
Verified Member
Posts: 328
Joined: Wed Nov 14, 2018 1:34 pm
Location: South Florida
Contact:

Re: Ruger 9mm Carbine - sight options

#4 Post by kronkmusic » Tue Jun 11, 2019 10:49 pm

senorgrand wrote:What's the eye relief?
2.5in and that's really 2.5in, there's no significant range to that. The good news is the glass is clear and the thing is cheap, you can pick one up with either the CQ or 3X reticle and with a free 3 MOA Fastfire 3 for under $300 shipped, and they have one of those truly no-questions-asked lifetime waranties.

User avatar
Bullitt68
Verified Member
Verified Member
Posts: 442
Joined: Mon Apr 29, 2019 1:39 pm
Location: So. AZ

Re: Ruger 9mm Carbine - sight options

#5 Post by Bullitt68 » Tue Jun 11, 2019 10:55 pm

It's not made for long range. Reminds me of a hi point. I'd do a red dot on it.
We sit in the mud... and reach for the stars.
Ivan Turgenev

Prevent Suicides Call https://suicidepreventionlifeline.org/t ... meone-now/

User avatar
senorgrand
Verified Member
Verified Member
Posts: 18599
Joined: Mon Jul 18, 2011 3:05 am
Location: LGC MEMBER: Calif Central Coast
Contact:

Re: Ruger 9mm Carbine - sight options

#6 Post by senorgrand » Tue Jun 11, 2019 11:04 pm

kronkmusic wrote:
Tue Jun 11, 2019 10:49 pm
senorgrand wrote:What's the eye relief?
2.5in and that's really 2.5in, there's no significant range to that. The good news is the glass is clear and the thing is cheap, you can pick one up with either the CQ or 3X reticle and with a free 3 MOA Fastfire 3 for under $300 shipped, and they have one of those truly no-questions-asked lifetime waranties.
Hmmm....
Image

Release the tapes!

User avatar
kronkmusic
Verified Member
Verified Member
Posts: 328
Joined: Wed Nov 14, 2018 1:34 pm
Location: South Florida
Contact:

Re: Ruger 9mm Carbine - sight options

#7 Post by kronkmusic » Wed Jun 12, 2019 1:13 am

Bullitt68 wrote:It's not made for long range. Reminds me of a hi point. I'd do a red dot on it.
Oh I definitely wouldn't go above 3x magnification on it. This gun is truly awesome inside 100yds. Much more than that... well it's still 9mm, even if fired out of a really good barrel.

User avatar
shinzen
Site Admin
Posts: 18740
Joined: Wed Nov 07, 2012 10:52 pm
Location: Northern California
Contact:

Re: Ruger 9mm Carbine - sight options

#8 Post by shinzen » Wed Jun 12, 2019 8:08 am

If you're going to spend $300, I'd jump to $400 and grab the Burris MTAC combo instead. Gives you the Fastfire plus the MTAC- the MTAC has 4" of eye relief, so if you decide to start moving and shooting at any point, you have an optic that won't frustrate you for that endeavor.
https://www.midwayusa.com/product/15485 ... ount-matte

And it comes with the PEPR mount, which is a really great mounting solution.
Image

User avatar
kronkmusic
Verified Member
Verified Member
Posts: 328
Joined: Wed Nov 14, 2018 1:34 pm
Location: South Florida
Contact:

Re: Ruger 9mm Carbine - sight options

#9 Post by kronkmusic » Wed Jun 12, 2019 11:15 am

shinzen wrote:If you're going to spend $300, I'd jump to $400 and grab the Burris MTAC combo instead. Gives you the Fastfire plus the MTAC- the MTAC has 4" of eye relief, so if you decide to start moving and shooting at any point, you have an optic that won't frustrate you for that endeavor.
https://www.midwayusa.com/product/15485 ... ount-matte

And it comes with the PEPR mount, which is a really great mounting solution.
Damn, that's actually a really good deal

User avatar
featureless
Verified Member
Verified Member
Posts: 3618
Joined: Tue May 23, 2017 6:11 pm
Location: California
Contact:

Re: Ruger 9mm Carbine - sight options

#10 Post by featureless » Wed Jun 12, 2019 12:02 pm

I have two Leopold scopes with the fire dot. They are very nice with a simple crosshair. One is a 1.5x4 and under a pound. The other is a 2x7 and just over a pound. The weight and simplicity sold me on them.

User avatar
shinzen
Site Admin
Posts: 18740
Joined: Wed Nov 07, 2012 10:52 pm
Location: Northern California
Contact:

Re: Ruger 9mm Carbine - sight options

#11 Post by shinzen » Wed Jun 12, 2019 8:04 pm

kronkmusic wrote:
Wed Jun 12, 2019 11:15 am
shinzen wrote:If you're going to spend $300, I'd jump to $400 and grab the Burris MTAC combo instead. Gives you the Fastfire plus the MTAC- the MTAC has 4" of eye relief, so if you decide to start moving and shooting at any point, you have an optic that won't frustrate you for that endeavor.
https://www.midwayusa.com/product/15485 ... ount-matte

And it comes with the PEPR mount, which is a really great mounting solution.
Damn, that's actually a really good deal
Yeah, if I was in the market for any such thing, I'd jump on it. About $200 less than normal.
Image

User avatar
Bisbee
Carpal Tunnel
Posts: 6020
Joined: Fri Mar 23, 2012 6:38 pm
Location: On The Border with no need of The Wall.
Contact:

Re: Ruger 9mm Carbine - sight options

#12 Post by Bisbee » Wed Jun 12, 2019 8:15 pm

Have you considered that a removable barrel may slightly change the point of aim slightly each time to take down the gun if using a receiver mounted optic? Part of the reason I don’t bother and keep the barrel mounted ghost ring. But maybe not as big a big deal for under 100 yard plinking as I imagine.
"It is better to be violent, if there is violence in our hearts, than to put on the cloak of non-violence to cover impotence. There is hope for a violent man to become non-violent. There is no such hope for the impotent." -Gandhi

User avatar
senorgrand
Verified Member
Verified Member
Posts: 18599
Joined: Mon Jul 18, 2011 3:05 am
Location: LGC MEMBER: Calif Central Coast
Contact:

Re: Ruger 9mm Carbine - sight options

#13 Post by senorgrand » Wed Jun 12, 2019 8:32 pm

Yeah...a barrel mounted optic would be better in theory.

Hey...can I just make a 3 MOA dot a bigger dot by upping brightness? Won't the "flare" make for a bigger dot?
Image

Release the tapes!

User avatar
atxgunguy
Verified Member
Verified Member
Posts: 5764
Joined: Mon Feb 20, 2012 1:42 pm
Location: Austin, TX
Contact:

Re: Ruger 9mm Carbine - sight options

#14 Post by atxgunguy » Wed Jun 12, 2019 8:44 pm

I’ve got a Vortex Sparc II on mine. Absolute tack driver at 50 yards.
LGC Texas - Central Region President

Image

User avatar
senorgrand
Verified Member
Verified Member
Posts: 18599
Joined: Mon Jul 18, 2011 3:05 am
Location: LGC MEMBER: Calif Central Coast
Contact:

Re: Ruger 9mm Carbine - sight options

#15 Post by senorgrand » Thu Jun 13, 2019 12:36 am

how about the Holosun HS507C?

It fits an RMR mount, which means I could put it on my Glock.

It also has a 2 MOA dot with a 65 MOA circle
Image

Release the tapes!

User avatar
atxgunguy
Verified Member
Verified Member
Posts: 5764
Joined: Mon Feb 20, 2012 1:42 pm
Location: Austin, TX
Contact:

Re: Ruger 9mm Carbine - sight options

#16 Post by atxgunguy » Thu Jun 13, 2019 8:15 am

Holosun makes good products. I'd probably recommend a riser for the pic rail mount as to get a better cheek weld.
LGC Texas - Central Region President

Image

User avatar
senorgrand
Verified Member
Verified Member
Posts: 18599
Joined: Mon Jul 18, 2011 3:05 am
Location: LGC MEMBER: Calif Central Coast
Contact:

Re: Ruger 9mm Carbine - sight options

#17 Post by senorgrand » Thu Jun 13, 2019 12:07 pm

I can already use the iron sights pretty well...do I really need a riser?
Image

Release the tapes!

User avatar
atxgunguy
Verified Member
Verified Member
Posts: 5764
Joined: Mon Feb 20, 2012 1:42 pm
Location: Austin, TX
Contact:

Re: Ruger 9mm Carbine - sight options

#18 Post by atxgunguy » Thu Jun 13, 2019 3:26 pm

senorgrand wrote:I can already use the iron sights pretty well...do I really need a riser?
Maybe not. I would think the RMR might sit too low as is. I could be wrong. I'm sure someone's done the homework on what works best.
LGC Texas - Central Region President

Image

User avatar
kronkmusic
Verified Member
Verified Member
Posts: 328
Joined: Wed Nov 14, 2018 1:34 pm
Location: South Florida
Contact:

Re: Ruger 9mm Carbine - sight options

#19 Post by kronkmusic » Thu Jun 13, 2019 3:38 pm

One pretty cool option if you end up going with an Aimpoint T-1 style red dot (Romeo5, etc.) Midwest Industries makes a mount that actually mounts it sideways so it sits lower to co-witness with the iron sights. It only works with their M-LOK rail, but lucky for you they just released their rail in OD green.

User avatar
featureless
Verified Member
Verified Member
Posts: 3618
Joined: Tue May 23, 2017 6:11 pm
Location: California
Contact:

Re: Ruger 9mm Carbine - sight options

#20 Post by featureless » Thu Jun 13, 2019 4:20 pm

senorgrand wrote:
Wed Jun 12, 2019 8:32 pm
Hey...can I just make a 3 MOA dot a bigger dot by upping brightness? Won't the "flare" make for a bigger dot?
Somewhat. I've found the aimpoint t-1 dot to be just right for a rifle but it doesn't get a lot bigger with brightness increases. It's easy to pick up even at its small size. I once had a Eotech and it is the best circle/dot thingy of them all but battery life sucks and you have to manually turn it on, something unacceptable for a zombie apocalypse rifle, so it went on its way to another home. I have had a Delta Point Pro 12 MOA triangle on a rifle and found it to be way too big plus most mounts put it too high for my tastes. It may be on it's way out the door as well. The RMR I recently picked up does look bigger the brighter it is set--I really like it. However, reader beware--I have astigmatism so your results may vary. Amazingly, they all look better without my glasses on. :ugeek:

edited to add: I don't think the RMR would be acceptable on a rifle as a primary--the field of view is pretty small. The new RSO might fair better.

User avatar
atxgunguy
Verified Member
Verified Member
Posts: 5764
Joined: Mon Feb 20, 2012 1:42 pm
Location: Austin, TX
Contact:

Re: Ruger 9mm Carbine - sight options

#21 Post by atxgunguy » Thu Jun 13, 2019 6:55 pm

PS. The Aimpoint T-1 costs more than what I paid for the entire Ruger Carbine. Not a commentary on quality or choice, just perspective on price for a fine gun that isn't that great past 50 yards.
LGC Texas - Central Region President

Image

User avatar
senorgrand
Verified Member
Verified Member
Posts: 18599
Joined: Mon Jul 18, 2011 3:05 am
Location: LGC MEMBER: Calif Central Coast
Contact:

Re: Ruger 9mm Carbine - sight options

#22 Post by senorgrand » Thu Jun 13, 2019 8:37 pm

yeah...trying to keep to the 1/2 price of the gun rule
Image

Release the tapes!

User avatar
Bisbee
Carpal Tunnel
Posts: 6020
Joined: Fri Mar 23, 2012 6:38 pm
Location: On The Border with no need of The Wall.
Contact:

Re: Ruger 9mm Carbine - sight options

#23 Post by Bisbee » Thu Jun 13, 2019 8:40 pm

:laugh:
"It is better to be violent, if there is violence in our hearts, than to put on the cloak of non-violence to cover impotence. There is hope for a violent man to become non-violent. There is no such hope for the impotent." -Gandhi

User avatar
shinzen
Site Admin
Posts: 18740
Joined: Wed Nov 07, 2012 10:52 pm
Location: Northern California
Contact:

Re: Ruger 9mm Carbine - sight options

#24 Post by shinzen » Thu Jun 13, 2019 9:35 pm

It's double the price of the gun man.
Image

User avatar
senorgrand
Verified Member
Verified Member
Posts: 18599
Joined: Mon Jul 18, 2011 3:05 am
Location: LGC MEMBER: Calif Central Coast
Contact:

Re: Ruger 9mm Carbine - sight options

#25 Post by senorgrand » Thu Jun 13, 2019 9:44 pm

Holosun is $300. Carbine was $500 and change I think.
Image

Release the tapes!

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests